GET A QUOTE

Product Know-How

  • SUN-100-Reliable Packaging! Reliable People!
    Post time: 12-06-2019

    Reliable Packaging! Reliable People! SUN-100 No matter in which era, "reliable" is a very precious quality! Being reliable can let people around you trust,and reliable products can make customers trust as in the past; as the day goes by, The more reliable you...Read more »

  • Selection of electrode size and usage of special electrode
    Post time: 11-30-2019

    Selection of electrode size and usage of special electrode The discharge area of the electrode is generally about 0.3 larger than its own diameter. For example, if the electrode diameter is 3mm, the processed hole diameter is about 3.3mm. When selecting the electrode, please consider ...Read more »

  • Application of EDM machine
    Post time: 11-23-2019

    Application of EDM machine Due to the flexibility of metal processing, EDM is widely used in the machinery industry and is highly praised! However, in the face of many types of EDM machines on the market, many masters will be confused. They don't know what kind of machining can be done&n...Read more »

  • Chip/sludge removal weapon – machine tool tank chip/sludge removal machine
    Post time: 11-07-2019

    Strong! Chip/sludge removal weapon Machine tool tank chip/sludge removal machine During the use of CNC machine tools, various metal chips, powder, sludge will gradually accumulate in the water tank of the machine. If it is not cleaned for a long time, the volume of the water tank w...Read more »

  • Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(2)
    Post time: 11-01-2019

    Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(2) 3. Machine connection and processing Figure 3 shows the tooling connection diagram of the portable EDM machine. The servo line controls the spindle of the machine head to move up and down; the high-frequency nega...Read more »

  • Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(1)
    Post time: 10-23-2019

    Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper 1. Part Analysis For the wind power caliper parts that are processed for the customer, we need to drill a Ø2.5 oil hole or two Y-shaped through holes between the side-by-side counter...Read more »

  • Portable EDM-How to remove the breaks such as taps, drills, screws, etc.?
    Post time: 10-18-2019

    How to remove the breaks such as taps, drills, screws, etc. The common point of tools such as taps and drill bits is that the center part is a solid body. Therefore, the middle solid part can be broken, and the tap and the drill bit can be taken out. As shown below:   Taps with a normal t...Read more »

  • Complete Collection of Broken Bolt Removal Method 2019
    Post time: 09-26-2019

    Complete Collection of Broken Bolt Removal Method 2019 For vast majority of the mechanical industry compatriots, it will be very lucky if you see this article! Because you may have encountered with broken bolts or taps in the work-piece. Here we collect some very practical methods for you. 1. B...Read more »

123 Next > >> Page 1 / 3