GET A QUOTE

News

  • Chip/sludge removal weapon – machine tool tank chip/sludge removal machine
    Post time: 11-07-2019

    Strong! Chip/sludge removal weapon Machine tool tank chip/sludge removal machine During the use of CNC machine tools, various metal chips, powder, sludge will gradually accumulate in the water tank of the machine. If it is not cleaned for a long time, the volume of the water tank w...Read more »

  • Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(2)
    Post time: 11-01-2019

    Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(2) 3. Machine connection and processing Figure 3 shows the tooling connection diagram of the portable EDM machine. The servo line controls the spindle of the machine head to move up and down; the high-frequency nega...Read more »

  • Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper(1)
    Post time: 10-23-2019

    Application of Portable EDM in the Processing of Oil Hole at Wind Brake Caliper 1. Part Analysis For the wind power caliper parts that are processed for the customer, we need to drill a Ø2.5 oil hole or two Y-shaped through holes between the side-by-side counter...Read more »

  • Portable EDM-How to remove the breaks such as taps, drills, screws, etc.?
    Post time: 10-18-2019

    How to remove the breaks such as taps, drills, screws, etc. The common point of tools such as taps and drill bits is that the center part is a solid body. Therefore, the middle solid part can be broken, and the tap and the drill bit can be taken out. As shown below:   Taps with a normal t...Read more »

  • MB-2000C Portable EDM Drilling Machine is exhibiting in WIMTS
    Post time: 10-12-2019

    MB-2000C Portable EDM Driller in WIMTS MB-2000C appeared at Wisconsin Manufacturing & Technology Show (WIMTS) in Oct. 2019. MB-2000C EDM punching machine can process holes between Dia. 0.5 and 3.0 mm on a metal workpiece of any size and shape. The machine could adapt various working e...Read more »

  • Complete Collection of Broken Bolt Removal Method 2019
    Post time: 09-26-2019

    Complete Collection of Broken Bolt Removal Method 2019 For vast majority of the mechanical industry compatriots, it will be very lucky if you see this article! Because you may have encountered with broken bolts or taps in the work-piece. Here we collect some very practical methods for you. 1. B...Read more »

  • Maintenance-free SUN-01 Oil Water Separator Working Principle
    Post time: 09-21-2019

    Maintenance-free Oil-water Separator Working Principle Oil-water separation technology is of great significance in all kinds of waste-water treatment processes. A well-designed oil-water separator can save costs of operation and maintenance for decades in future. Studies have shown that when the ...Read more »

  • Cutting Fluid Daily Maintenance Tips(2)
    Post time: 09-11-2019

    Cutting Fluid Daily Maintenance Tips(2) 4. Regularly clean the metal slag and sludge at the bottom of the cutting fluid tank. Types of metal slag for various machine tools are different, such as iron filings, aluminum filings, grinding debris, fine gravel powder, etc., and excessive accumulatio...Read more »

123456 Next > >> Page 1 / 7